IDE/SATA Adapter USB Hub

  HU101;
Features:
-Adds 4 USB ports.
-Fully Compliant with USB 2.0 Specification
-Support data transfer rate at 1.5/48Mbps
-Individual Port Over-Current Protection;
-Friendly & ergonomic design, easily portable
-Provide up to 500mA per port sufficient for diverse devices;
-Power Adapter included(5v/2.6A Output);
-Plug & Play installation
-Support Windows 98, 2000,Me, XP
-Support MAC OC 8.6 & above
-Hi-speed downstream ports with USB A female connectors
-1 Hi-speed upstream ports with Mini USB 5P Jack UL201
Features:
-Integrated Fast Ethernet MAC,physical Chip and transceiver in one chip
-Support 10Mb/s and 100Mb/s N-Way Auto-negotiation operation
-Compliant to USB interface Version 1.0/1.1./2.0
-Full-Speed(480Mb/s)USB Device
-Support all USB standard command
-Support Suspend/Resume detection logic
-Support 4 endpoints
1.1 control endpoint with maximum 8-bytes/packet
2.1 bulk in endpoint with 64 bytes/packet
3.1 bulk Out endpoint with 64 bytes/packet
4.1 interrupt Inendpoint with maximum 8-bytes/packet
-18K bytes SRAM built in .(2K bytes for Tx buffer,and 16K bytes for Rx buffer)
-Uses 93c46 to store resource configuration,ID parameter,etc
-Half/FULL duplex 10/100Mbps operation
-Supports Full Duplex Flow Control (IEEE 802.3X)ISUA101:
Features:
-Connect any device with an SATA or IDE interface Hard Driver to a PC with USB interface
-Support SATA/SATA &IDE spread-spectrum transmitter
-Compliance with USB Mass Storage Class
-Support SATA or IDE CD-ROM/R/RW DVD-ROM etc
-Complies with USB 2.0 standardsITSC101
Features:
-One 40pin IDE port;
-One Serial ATA port
-One 4pin power connector
-Converts Serial ATA To parallel ATA
-Support ATA 100/133
-Compliant with Serial ATA specification; IDE/SATA Adapter USB Hub
Mo